Baracuda Pacer

The Baracuda Pacer is built on Baracuda's long history as a global leader in automatic pool cleaning technology.

Find a Dealer

The Baracuda Pacer connects to a dedicated cleaner (suction) line or a pool skimmer. As water flows through the cleaner, dirt and debris are pulled directly into the pool filtration system.

Technical Details

  • To help prevent suction entrapment accidents, wall vacuum fittings should have a safety vac lock installed. Contact your builder or retail pool professional for details.
  • Clean the skimmer basket, pump basket and pool filter before installing the Zodiac cleaner and on a regular basis thereafter.
  • Always disconnect the cleaner before cleaning or backwashing the pool filter. After cleaning, let the filtration system run for at least five minutes before re-connecting the cleaner.
  • Remove the cleaner from the pool before chemical or shock treatments. Wait a minimum of four hours after super chlorination before re-installing the cleaner.

Frequently Asked Questions

Click a frequently asked question below to see the answer.

Machine doesn't move.
1. Use Pool Pulse to determine proper flow. 2. Clean filter and baskets if needed. 3. Inspect Diaphragm for damage. 4. Inspect hose sections for leaks by lifting each section above water. Cracked hose will make a hissing sound.
Machine is not covering opposite end.
1. Divert return inlets downward. 2. Lay hose in a straight line in the sun for a few hours to relax memory. 3. Move hose weight further from cleaner head.
Machine is patterning.
1. Divert return inlets downward and toward the center of the pool. 2. Confirm proper hose length - add 1 to 2 hose sections. 3. Lay hose in the sun in a straight line for a few hours to relax memory.
Machine not climbing walls.
1. Machine may not climb sidewalls of some vinyl pools. 2. Use Pool Pulse to confirm proper flow. 3. Confirm proper hose length. 4. Adjust hose weight.
Machine stuck at steps.
1. Utilize return flow as shown in owner's manual. 2. Reduce flow to low side of "ideal" range. 3. Check hose for proper length. 4. Move hose weight away from cleaner head slightly. 5. Install wheel deflector (Part No. W69647).
Machine stuck under ladder.
Install ladder guard (Part# G21).
Machine won't leave edge or rim of pool.
1. Utilize return flow to increase coverage. 2. Use Pool Pulse to lower flow. 3. Adjust hose weight.

Resources

Baracuda Pacer Owner's Manual

Item #: TL2075
File Size: 375757
Description: Languages: ENG

Download View Online