PlusHP

• 

PlusHP Pumps are designed with the high performance of a larger pump in a compact body.

PlusHP pumps are designed with the high performance of a larger pump in a compact body, which makes it a great choice for pool and spa renovations, in-foor cleaning systems, spa-jet boosters, solar energy heating systems, and small equipment areas.

Features

• Available in highly effcient two-speed models, which can save up to 60% on electrical consumption compared to single speed pumps.
• Designed with Jandy’s patented Quiet Technology for whisper-quiet operation.

Technical Details

• Powerful, efficient, compact high-head pump
• Large trap basket for increased debris holding capacity
• Ergonomic Cam-Lock Lid with easy-to-read aligning indicators
• Comes complete with 2” x 2 ½” quick-connect unions
• Ideal for in-floor cleaning, spa-jet boosters, and solar systems

• Models
• Specifications
• Accessories
• FAQs
• Parts
• Downloads

Model	Description
PHP1.0	Jandy High Head Pump, 115/230 VAC, 1.0 HP
PHP1.0CND	Jandy High Head Pump, 115/230 VAC, 1.0 HP
PHP1.5	Jandy High Head Pump, 115/230 VAC, 1.5 HP
PHP1.5CND	Jandy High Head Pump, 115/230 VAC, 1.5 HP
PHP2.0	Jandy High Head Pump, 230 VAC, 2.0 HP
PHP2.0CND	Jandy High Head Pump, 230 VAC, 2.0 HP
PHP.75	Jandy High Head Pump, 115/230 VAC,.75 HP
PHP.75CND	Jandy High Head Pump, 115/230 VAC,.75 HP
PHPF1.0	Jandy PlusHP High Head Pump, 230/115 VAC, Full-Rated 1.0HP
PHPF1.5	Jandy PlusHP High Head Pump, 230/115 VAC, Full-Rated 1.5HP
PHPF2.0	Jandy PlusHP High Head Pump, 230 VAC,Full-Rated 2.0HP
PHPF.50	Jandy PlusHP High Head Pump, 230/115 VAC, .Full-Rated 50HP
PHPF.75	Jandy PlusHP High Head Pump, 230/115 VAC, .Full-Rated 75HP
PHPM1.0	Jandy PlusHP High Head Pump, 230/115 VAC, Up-rated 1.0HP
PHPM1.5	Jandy PlusHP High Head Pump, 230/115 VAC, Up-rated 1.5HP
PHPM2.0	Jandy PlusHP High Head Pump, 230/115 VAC, Up-rated 2.0HP
PHPM2.5	Jandy PlusHP High Head Pump, 230 VAC, Up-rated 2.5HP
PHPM.75	Jandy PlusHP High Head Pump, 230/115 VAC, .Up-rated 75HP
PHPU1.0	Jandy High Head Pump, Up Rated, 115/230 VAC, 1.0 HP
PHPU1.5	Jandy High Head Pump, Up Rated, 115/230 VAC, 1.5 HP
PHPU2.0	Jandy High Head Pump, Up Rated, 115/230 VAC, 2.0 HP
PHPU2.5	Jandy High Head Pump, Up Rated, 230 VAC, 2.5 HP
PHPF1.0-2	Jandy PlusHP High Head Pump, 230 VAC, Full-Rated 1.0 HP, 2-Speed
PHPF1.5-2	Jandy PlusHP High Head Pump, 230 VAC, Full-Rated1.5 HP, 2-Speed
PHPF2.0-2	Jandy PlusHP High Head Pump, 230 VAC, Full-Rated 2.0 HP, 2-Speed
PHPM1.5-2	Jandy PlusHP High Head Pump, 230 VAC, Up-rated 1.5HP 2Speed
PHPM1.5-2CND	1.5-2HP UPRATED HIGH EFFE PUMP, CANADIAN.
PHPM2.0-2CND	2.0-2HP UPRATED HIGH EFFE PUMP, CANADIAN.
PHPM2.5-2	Jandy PlusHP High Head Pump, 230 VAC, Up-rated 2.0 HP, 2-Speed
PHPU2.0-2	Jandy High Head Pump, 230 VAC, 2.0 HP, 2 Speed
PHPU2.5-2	Jandy High Head Pump, 230 VAC, 2.0 HP, 2 Speed

Full Rated Pumps

Model	HP	Voltage	Amps	Pipe Size	Carton Weight	Overall Length ‘A’
PHPF.50	.50	230/115	5.4/10.8	1.5"-2"	40.4 lbs	28.75"
PHPF.75	.75	230/115	7.1/14.2	2"-2.5"	41.8 lbs	28.75"
PHPF1.0	1.0	230-115	8.0/16.0	2"-2.5"	43.3 lbs	29.25"
PHPF1.5	1.5	230/115	11.2/22.4	2"-2.5"	54.6 lbs	30.75"
PHPF2.0	2.0	230	11.5	2"-2.5"	49.3 lbs	29"
PHPF1.0-2	1.0	230	7.2/3.0	2"-2.5"	48.7 lbs	29.75"
PHPF1.5-2	1.5	230	10.0/3.5	2"-2.5"	52.9 lbs	30.25"
PHPF2.0-2	2.0	230	11.0/4.0	2"-2.5"	62.3 lbs	29.75"

---

Maximum (Up) Rated Pumps

Model	HP	Voltage	Amps	Pipe Size	Carton Weight	Overall Length ‘A’
PHPM.75	.75	230/115	5.4/10.8	1.5"-2"	40.4 lbs	28.75"
PHPM1.0	1.0	230/115	7.1/14.2	2"-2.5"	41.8 lbs	28.75"
PHPM1.5	1.5	230/115	8.0/16.0	2"-2.5"	43.3 lbs	29.25"
PHPM2.0	2.0	230/115	11.2/22.4	2.5"-3"	54.6 lbs	30.75"
PHPM2.5	2.5	230	11.5	2"-2.5"	49.3 lbs	29"
PHPM1.5-2	1.5	230	7.2/3.0	2"-2.5"	48.7 lbs	29.75"
PHPM2.0-2	2.0	230	10.0/3.5	2"-2.5"	59.9 lbs	30.25"
PHPM2.5-2	2.5	230	11.0/4.0	2"-2.5"	62.3 lbs	29.75"

Model	Description
SEAQL1001	Jandy Jandy Sweep Elbow
SEFL1002	Jandy Jandy Sweep Elbow w/ Plug

Air leaks are still present.

1 Check the suction side piping union. While the pump is running, try to tighten the union. If this does not stop the air leak, turn off the pump. Loosen both unions and slide the pump out of the way. Remove, clean and re-install both union o-rings.
2. Reposition the pump next to the piping and secure the union nuts to the pump. With clean union o-rings, hand tightening of the unions should create a seal. If the unions still do not seal, gently tighten with a large pair of tongue and groove pliers. DO NOT OVER-TIGHTEN.

Bubbles present in the pump basket.

1. Air in system. Check the pool or spa water level to ensure it is at the proper level and that air is not being drawn into the suction plumbing.
2. If the water is at normal level, turn off the pump. Remove the lid and check for debris around the lid o-ring seat, as this will cause air leaks in the system.
3. Clean the lid o-ring and put the lid back in place.
4. Hand tighten the lid to make an air tight seal.
5. Do not use any tools to tighten the lid. Turn the pump back on.

The cleaning/circulating system is not operating correctly.

1. Verify that the skimmer baskets, pump basket and other screens are clean. Clean as necessary.
2. Check filter and clean as necessary.
3. Check valve positions. Adjust as necessary. Note: Multiple pieces of equipment operating at one time (for example, waterfalls, spa jets, and surface returns) will affect the cleaning system and may prevent it from working properly.
4. Check the cleaning system manual to ensure that the system is adjusted according to the manufacturer's recommendations.

The pump gets hot and shuts off periodically.

1. Ensure that there is adequate room around the motor to circulate air and keep the motor cool.
2. Have a qualified electrician check for loose connections and check the voltage at the pump motor while it is in operation. The voltage must be within 10% of the motors data plate rating. If the voltage is not within 10%, contact a qualified electrician and/or the local power service provider.

The pump is leaking water between the motor and pump body.

This is caused by a damaged or failed mechanical seal. Replace the seal. See the "Mechanical Seal Replacement" portion of the manual.

There is no air in the system, but the pressure is still low.

1. It is possible that debris is caught in the impeller. The pump impeller moves the water, and the vanes in the impeller can become blocked with debris. See the "Blocked Impeller" portion of your manual for more information.

There is no debris blocking the impeller and the pressure is still low.

1. The pump impeller and diffuser are showing signs of normal wear. Have a qualified service technician check the impeller and diffuser and replace as necessary.
2. If the pump is part of a relatively new instalaltion, it could be an electrical problem. Contact a qualified service technician. Have the technician check for loose electrical connections and check the voltage at the pump motor while in operation. The voltage must be within 10% of the motor's data plate rating. If the vltage is not within 10%, contact a qualified electrician and/or the local power service provider.
3. Pump seal is leaking air. Have a qualified service technician replace the seal.

Will I lose water if I run my pool pump on Bypass?

No, you only lose water in a pool if there is a leak, through splash out, and when you backwash.

PlusHP Pump Parts List

Launch our online catalog viewer to review breakout diagrams and part numbers.

File	Description	Size
SL6202.pdf	Jandy Plus HP Pump Sell Sheet	5.68 MB
SL6200.pdf	Zodiac Pumps Family Brochure	3.9 MB
SA6221.pdf	Jandy PlusHP Specification Sheet	428.23 KB
SA5100.pdf	Pump Reference Guide	527.55 KB

• Where To Buy
• Select Dealer Retailer Builder
•  

 

Product Comparison

 

 

 

Automate Your Equipment

Automate any pool or pool and spa combination system that share equipment.