Select Your Country


Select Your Language

Zodiac X7 Quattro Suction Pool Cleaner

Zodiac X7 Quattro®

This product is no longer in production.

Dates Manufactured:

Technical Details

  • Premium section-side cleaner with Dura-Life Diaphragm Technology
  • Operates in all in-ground pools
  • Connects directly to skimer or dedicated 1.5" vacuum line
  • Includes 36 ft. of feed hose

Could I break the pool cleaner if I disassemble it to check the diaphragm?

No, the unit is easy to disassemble. There are a few threaded components to remove by hand.

Is there an adapter that connects the hoses to the pool cleaner? The hoses do not fit.

No adapter is required, the hoses will fit onto the OEP with a little push.

My Cleaner climbs walls excessively?

1. Using Flow Gauge as guide, reduce flow to the cleaner.

2. Verify correct hose weight position. Try moving hose weight further away from cleaner head.

Note: If the cleaner is moving extremely fast or climbing the pool walls that is an indication that the flow is too high and the Flowkeeper setting must be reduced. To adjust the flow, pull the adjustment handle on the Flowkeeper Valve to raise or lower the flow rate.

My Cleaner flips over?

1. Use Flow Gauge or Pool Pulse to insure proper flow.

2. Using Flow Gauge as guide, increase or decrease flow on FlowKeeper valve.

3. Check swivel on cleaner. Swivel should rotate freely.

4. Contact service technician

My Cleaner won't leave the edge or rim of the pool?

1. Using Flow Gauge or Pool Pulse as guide, reduce flow to cleaner.

2. Utilize return flow to move cleaner.

3. Confirm that the hose weight position on the hose is correct. Adjust if needed.

My Suction Cleaner Stops and Starts?

1. Check if any debris is stuck in the diaphragm hose, skimmer basket and the hair and lint pot in the filtration pump.

2. Use Pool Pulse or Flow Gauge (supplied with suction cleaner) to determine the proper flow.

3. Using the Pool Pulse or Flow Gauge, make the necessary Flowkeeper valve setting changes.

4. Check hoses for leaks and splits.

5. Ensure the pump is on high speed.

My Cleaner isn't covering the opposite end of the Pool?

1. Add return diverters or divert return inlets downward. Use return flow to move cleaner.

2. Confirm proper hose length - add 1 to 2 hose sections.

3. Verify correct hose weight position.

Note: The hose weight is positioned to compensate for the buoyancy of the hose. A properly balanced hose will create a
45-degree angle to the cleaner and the bottom of the pool.

My Pool Cleaner seems to be moving backwards, is that normal?

All suction pool cleaners with diaphragms move backwards. The diaphragm pulsates moving the cleaner backwards to the hose assembly.

My Suction Cleaner is patterning?

1. Direct return inlets down. Add a return diverter if necessary.

2. Lay hose in a straight line in the sun for a few hours to relax the memory.

3. Confirm proper hose length - add 1 to 2 hose sections.

4. If hose weight required, verify correct position.

Note: A properly balanced hose will create a 45-degree angle to the cleaner and the bottom of the pool.

Why do I have to take out the diaphragm on a new pool cleaner?

To reset the diaphragm to its correct length and assist with start up problems.

Feature Description
Pool Type In-Ground
Cleaner Type Suction-side
Connection Skimmer or Vacuum Line
Warranty 1 Year
Hose Type Long-Life, 36 ft. of Feed Hose
Hose Connection Twist Lock, Flex Connector at Cleaning Head
Diaphragm Dura-Life
Traction Quattro Traction Control Discs
Pool Surface(s) Tile, Vinyl, Gunite, and Fiberglass
Automatic Pool Cleaners

Zodiac X7 Quattro Parts List

Launch our online catalog viewer to review breakout diagrams and part numbers.

learn more
SL2015.pdfZodiac X7 Quattro Brochure1.79 MB
SL6700.pdf2011 Zodiac Disc Cleaner Family Brochure4.77 MB
TL 2015.PDFZodiac X7 Quattro I/O Manual4.32 MB